Acumen EON-2028HS - Manual (Page 75)

Upper Limit for Zone 3 (blinking)
- Press STR/LAP Button
B or STP/RESET
Button C to adjust the value.
- Press MODE/NXT Button
D
to proceed to the
next item.
Lower Limit for Zone 3 (blinking)
- Press STR/LAP Button
B or STP/RESET
Button C to adjust the value.
- Press MODE/NXT Button
D
to proceed to the
next item.
Out of Zone Alarm (blinking)
- Press STR/LAP Button
B or STP/RESET
Button C to set the alarm to ON or OFF.
- Press MODE/NXT Button
D
to exit and return
to the Recall Data Mode.
LAP
LAP
LAP
Step 17
Step 18
Step 19
Note: Press and hold SET button A at any time in the Setting Mode to exit
the Setting Mode.
From the Recall Data Mode, press MODE/NXT Button D one time to
return to the Analog Time Display.
71
Part II
B
D C
B
D C
B
D C