Acumen EON-2028HS - Manual (Page 43)

39
LAP
LAP
LAP
Step 1
Step 2
Step 3
M or Mi (blinking)
- Press STR/LAP Button
B or STP/RESET
Button C to select 1600 M or 1 Mile.
- Press MODE/NXT Button
D
to proceed to next
step.
Stopwatch (displayed)
- Press STR/LAP Button
B to start and run.
- Press STP/Reset Button C to stop.
When Stopped the Stopwatch
- Press MODE/NXT Button
D to display MET value.
Note:
If no heart rate is detected, the watch displays
the "MET CAL. ERR", press MODE/NXT button
D will exit Calibrating Mode and back to "FLUID
LOSS ON" display.
Part II
B
D C
B
D C
D
From the Fluid Check
TM
Mode, press MODE/NXT Button D repeatedly to
return to the Analog Time Display.