ZOLL Propaq MD Rev A - Manual (Page 84)

C HAPTER 6 M ONITORING ECG
6-6 www.zoll.com 9650-0805-01 Rev. A
Selecting ECG Waveforms for Display
You can fit up to four waveforms on the Propaq MD display. The first waveform at the top of
the display is always an ECG waveform. In the following example, Lead
II (RA-LL), is the
source of the ECG waveform trace:
The are two ways to specify which ECG lead is the source of the primary waveform trace. One
way is to press the ECG lead selection quick access key to display the available ECG
waveform sources. The available waveform sources are determined by the type of ECG cable
connected to the unit.
The other way to specify the source of the primary waveform trace is to navigate to and select
the source label for the primary ECG waveform (Lead
l in the screen below). The Propaq MD
unit then displays the available ECG waveform sources. The following example illustrates the
waveform source list that the Propaq MD unit displays when a 5-lead ECG cable is connected
to it. The list of available ECG waveform sources includes Leads
I , II , III , aVR , aVL , aVF , and V .
You can select Lead lI (the default), or use the navigation keys to highlight and select another
displayed ECG lead as the source for the waveform trace.
I, II,
III...