Extron Electronics SW HDMI Series User Guide - Manual (Page 14)

SW HDMI Series • Installation 8
Connecting to the USB Port
The mini B USB port is located on the SW HDMI front panel. It can be used to configure
the switcher via SIS commands.
1. Connect a USB A to mini B cable between the USB Config port on the switcher front
panel and the USB port on your computer.
USB Cable
USB A USB Mini B
USB 1
USB
Ports
Computer
SW HDMI Front Panel
SW4 HDMI
HDMI SWITCHER
1
IR
CONFIG
SIGNAL
INPUTS INPUTS OUTPUT
1 2 3 4
HDCP
2 3 4
AUTO
SWITCH
Figure 6. USB Port Connection
2. If this is the first time you have connected an SW HDMI to this USB port on your
computer, the Found New Hardware Wizard opens. On the first screen, specify
whether you want the computer to connect to Windows Update in order to search
the web for the driver that it needs to communicate with the switcher via the USB
port. This is not necessary if the USB driver already exists on your computer.
Figure 7. Found New Hardware Wizard Opening Screen