Reference information, Specifications – Extron Electronics SW HDMI Series User Guide User Manual

Page 35

Advertising
background image

SW HDMI Series • Reference Information

29

Reference

Information

This section reference information for the SW HDMI Series switchers. Topics that are
covered include:

Specifications

Part Numbers

Mounting the SW HDMI

Specifications

Video

Maximum data rate ........................ 6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock ...................... 165 MHz
Resolution ...................................... Up to 1080p @ 60 Hz or 720p/1080i @ 120 Hz, 12-bit color
Formats .......................................... RGB and YCbCr digital video
Standards ....................................... DVI 1.0, HDMI, HDCP 1.4

NOTE: The SW HDMI Series switchers support TMDS data rates up to 6.75 Gbps, Deep Color up to 12-bit, 3D,

HD lossless audio, and other HDMI specification features.

Video input

Number/signal type ........................ 2 or 4 (depending on model) single link HDMI (or DVI-D*)
Connectors .................................... 2 or 4 female HDMI type A

Video output

Number/signal type ........................ 1 single link HDMI (or DVI-D*)
Connectors .................................... 1 female HDMI type A

Control/remote — switcher

Serial control port ........................... (1) RS-232, 3.5 mm captive screw connector, 5 pole (shared with autoswitching

control)

Baud rate and protocol ................... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations ..... 1 = Tx, 2 = Rx, 3 = GND
Contact closure .............................. (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232)
Contact closure pin configurations . Pins 4 and 5 shorted together turn autoswitch mode on.
IR controller module ....................... IR 102 remote control (optional)

30' maximum, 40 degrees off axis

Program control ............................. Extron Simple Instruction Set (SIS

)

Advertising