Extron Electronics SW HDMI Series User Guide - Manual (Page 34)

SW HDMI Series • Remote Communication and Control 28
11. If you want to remove a device from the Devices section, do the following:
a. Click on the names of the devices to be deleted, to highlight them.
b. Select Remove Selected Device(s) from the Edit menu.
c. On the Remove Device(s) window, select or deselect any devices on the list as
desired, then click
Remove .
To remove all devices, select Remove All Devices from the Edit menu.
12. Click Begin. The following indicators show the progress of the update:
• The Transfer Time section shows the amounts of remaining and elapsed time for
the update.
• The Total Progress section displays a progress bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and another progress bar. The Status column displays
Uploading .
Figure 21. Firmware Upload in Progress
13. The upload is complete when the Remaining Time field shows 00.00.00 , the
Progress column shows 100% , and Completed is displayed above the progress bar and
in the Status field. Close the Firmware Loader window.
Figure 22. Firmware Upload Complete