Extron Electronics SW HDMI Series User Guide User Manual
Page 27
Advertising
SW HDMI Series • Remote Communication and Control
21
X*
= Front panel lockout enabled or disabled
0 = Front panel unlocked
1 = Front panel locked
X(
= HDCP requirement
0 = HDCP not required
1 = HDCP required
X1)
= Signal status
0 = no signal detected
1 = signal detected
X1!
= On and off or enabled and disabled status
0 = off or disabled
1 = on or enabled
NOTE: Unless otherwise indicated, commands are not case-sensitive.
Advertising