Figure 5-24: vesa mounting holes – IEI Integration DM_Series v1.14 User Manual
Page 148
Advertising
DM Series Industrial Monitor
Page 148
Figure 5-24: VESA Mounting Holes
The monitor stand mounting plate has a matching VESA hole pattern. To mount the DM
series industrial monitor onto a stand, please follow the steps below.
Step 1:
Line up the threaded holes on the monitor rear panel with the screw holes on the
monitor stand mounting plate.
Step 2:
Secure the monitor to the stand with the supplied retention screws (Figure
Step 0:
Advertising