IEI Integration DM_Series v1.14 - Manual (Page 52)

DM Series Industrial Monitor
Page 52
2.6.2 Rack and Cabinet Mounting
Each model of the DM series industrial monitor has a series of holes located on the rear of
the front panel for mounting the monitor to a rack or cabinet.
NOTE:
1. The DM-190 monitor requires two special mounting brackets for installation
into a rack or cabinet. Refer to Section 5.5.2.2 for details.
2. The DM-84 monitor uses panel mounting clamps for installation into a rack or
cabinet. Refer to Section 5.5.1.1 for details.
3. The DM-65 monitor uses panel mounting clamps for installation into a rack or
cabinet. Refer to Section 5.5.1.2 for details.
Figure 2-12 shows a typical rack or cabinet installation.
Figure 2-12: Typical Rack or Cabinet Mounting