IEI Integration DM_Series v1.14 - Manual (Page 35)

DM Series Industrial Monitor
Page
35
2.2.4 Front Panel Variant 3
The following model of the DM series industrial monitor has an OSD control panel located
in-line along the bottom of the aluminum frame:
„ DM-65
Figure 2-3 shows the location of the front panel variant 3 OSD controls.
Figure 2-3: Front Panel Variant 3
2.3 Bottom Panel
All peripheral device connectors are located on the bottom panel of the DM series
industrial monitor. The following sections describe the bottom panel variants and their
associated connectors.
2.3.1 Available Connectors
There are a number of bottom panel peripheral device connectors available for the DM
series industrial monitor.
„ VGA connector
„ DVI-D connector
„ 12V power connector
„ 9~36V terminal block
„ RS-232 serial connector