5 monitor arm or stand mounting, Figure 2-15: typical monitor arm or stand mounting – IEI Integration DM_Series v1.14 User Manual
Page 55
Advertising
DM Series Industrial Monitor
Page
55
2.6.5 Monitor Arm or Stand Mounting
Most models of the DM series industrial monitor have four or eight Video Electronics
Standards Association (VESA) standard holes located on the rear panel for mounting the
monitor to a monitor arm or stand.
NOTE:
There is no monitor stand available for the DM-190 monitor.
Figure 2-15 shows a typical monitor arm or stand mounting.
Figure 2-15: Typical Monitor Arm or Stand Mounting
Advertising