MoJack PRO - Manual (Page 10)

MoJack PRO Lift MoJack PRO Lift
18 19
Maintenance Schedule
• Before each use, always check for any worn, loose or
damaged parts on the MoJack PRO. If any damaged
parts are present, do not use the MoJack PRO and
contact MoJack at 1-877-575-3173.
• Check the Lifting Strap before every use. Make sure
the Lifting Strap is not damaged or torn and the
stitching on the loop is secure. If any of these issues
are present, do not use the MoJack Pro and call MoJack
at 1-877-575-3173.
• Check that the Safety Ratchet is working properly.
As the Carrier raises, the clicking sound indicates that
the Safety Ratchet is functioning properly. Raise the
Carrier to the working height and rotate the Winch
Handle counterclockwise 1/2 turn to release the tension
off of the Lifting Strap. If the Carrier does not rest firmly
into the Safety Ratchet and tension remains on the
Lifting Strap, do not use the MoJack Pro and call MoJack
at 1-877-575-3173.
• Place lithium grease on the small cog of the winch and
between the small cog on the winch and the braking
mechanism once a year or every 50 uses.
Check entire
length of
Lifting Strap
Winch
Small Cog
Winch
Carrier
Safety
Ratchet
Braking
Mechanism
Place Lithium
Grease
Carrier
Lifting Strap Loop
10” – 11.5” (25cm – 29cm) Tire Size
12” – 15” (30cm – 38cm) Tire Size
15.5” – 17” (39cm – 44cm) Tire Size
Support Rod Guide for Tire Sizes
Not for use with tires over 17” (44cm) in size