MoJack PRO - Manual (Page 4)

MoJack PRO Lift MoJack PRO Lift
6 7
Hardware List
13
Item
No. Qty.
Description
Cap Screw – M12-1.75 x 85
Nylock Nut – M12-1.75
Cap Screw – M12-1.75 x 95
Cap Screw – M10-1.5 x 30
Nylock Nut – M10-1.5
Winch Washer – 10mm 2
4
1
3
5
3
14
15
16
17
18
13 Cap Screw – M12-1.75 X 85
19
Item
No. Qty.
Description
Winch Handle Washer – 12mm
Clevis Pin
Push Pin
Hair Pin
Cap Screw – M14-2.0 x 100
Nylock Nut – M14-2.0 1
1
4
3
1
1
20
21
22
23
24
14 Nylock Nut – M12-1.75
15 Cap Screw – M12-1.75 X 95
16 Cap Screw –
M10-1.5 X 30
17 Nylock Nut –
M10-1.5
23 Cap Screw – M14-2.0 X 100
24 Nylock Nut – M14-2.0
19 Winch Handle
Washer – 12mm
20 Clevis Pin
21 Push Pin
22 Hair Pin
18 Winch Washer –
10mm
Tools Needed for Assembly
(2) 22mm Wrench (2) 17mm Wrench (2) 19mm Wrench
Assembly Instructions
STEP 1
Remove MoJack PRO from package.
Inventory items to be certain all parts and hardware
are present. If any parts or hardware are missing,
please contact MoJack at 1-877-575-3173 or
email us at [email protected].
STEP 2
Assemble the Wheel to the Base
by inserting Cap Screw and Nylock Nut
and tighten. Repeat with second Wheel.
Note: Do not over tighten Nylock Nut.
Base 3
4 3
13 14
Wheel 4 Nylock Nut 14
Cap Screw 13
Attach the Tower to the Base
using Cap Screw and Nylock
Nut as shown.
Note: Do not over tighten Nylock
Nut.
STEP 3
Cap Screw 15
1 3
15
14
Base 3
Nylock Nut 14
Tower 1
Cap
Screw
Hole