Exhibit 1.2-2 connector side detail, Exhibit 1.2-3 the faststream front panel detail, Exhibit 1.2-1 – ATTO Technology FastStream SC 5700 User Manual
Page 11: Exhibit 1.2-2, Exhibit 1.2-3
6
Ethernet port connector: a lighted green LED
shows a valid link; off indicates that no link is present,
and blinking indicates activity. A separate bicolor LED
indicates 10/100/1000 MbE speed: green on indicates
100 MbE; yellow on indicates 1000 MbE, and off
indicates 10 MbE
Fibre Channel port: a lighted green LED indicates
link; off means no link. A separate green LED indicates
FC speed; lit means 4-Gb/sec; off means 1- or 2-
Gb/sec.
SAS/SATA port: A green LED lit on indicates activity
and off means no activity.
LEDs on the faceplate are:
A Ready LED is lighted green to indicate ready and
off to show not ready.
An Alert LED is lighted yellow to show an alert
condition.
Power: a lighted green LED indicates power has
been turned on to the appliance.
Fibre Channel port: bicolor LED indicates FC
speed. If it is off, speed is 1-Gb; if it is green, 2-Gb, and
yellow indicates 4-Gb FC. A separate green LED
indicates activity if it is lit, no activity if it is off.
SAS/SATA port: A green LED on each port
indicates activity if it is lit.
Exhibit 1.2-1 The connector side of the FastStream SC5500.
Exhibit 1.2-2 Connector side detail.
Exhibit 1.2-3 The FastStream front panel detail.