ATTO Technology FastStream SC 5700 - Manual (Page 49)

ii
CLI error messages
The following error messages may be returned by the Command line Interface:
ERROR. Invalid Command. Type 'Help' for command list.
ERROR. Wrong/Missing Parameters
Usage: <usage string>
ERROR Invalid RAID Group state
ERROR Invalid Block Device index
ERROR Invalid RAID MemberIdx
ERROR Maximum number of RAID Groups exceeded
ERROR Insufficient number of RAID Group members
ERROR
Block Device at specified index no longer available
ERROR Insufficient RAID Group members for RAID type
CLI summary
The following chart summarizes the Command Line Interface commands, their defaults, and an example of how
to enter the commands. Commands which have no default values have a blank entry in that column of the table.
CAUTION CAUTION
Do not use CLI unless you are directed to by an ATTO technician.
Changing parameters may cause loss of data and/or disruption to performance and reliability of
the FastStream.
The ExpressNAV Storage Manager is the preferred method to operate and manage the
FastStream. Refer to
Interface Options on page 39 for details.
GroupName The name of the RAID group, designated by the user, to which a block
device is assigned. Use
RGDisplay to discover RAID group names
MemberIndex Index designation of a RAID group member as found by using the
RMStatus command
mp1 Ethernet port used to manage the FastStream
PartitionIndex Index designation of a partition as found by using the PartitionDisplay
command
Command Default Example
AutoMap automap
AutoResume initialization = enabled
rebuild = enabled
erase = disabled set autoresume all disabled
BlockDevClean blockdevclean 30
BlockDevIdentify blockdevidentify 30
BlockDevIDStop blockdevidstop
BlockDevScan blockdevscan
BootDelay 5 set bootdelay 25
Symbol/Abbreviation Indicates