ATTO Technology FastStream SC 5700 - Manual (Page 46)

41
ATTO Technology Inc. FastStream SC Installation and Operation Manual
10.0 Update Firmware
Firmware updates are available on the ATTO website. Contact your ATTO sales representative for complete
information.
The ATTO FastStream has several processors which
control the flow of data. The firmware to control these
processors can be upgraded in the field using the
ExpressNAV Storage Manager.
Be sure all data is backed up before updating firmware
to prevent data loss.
CAUTION CAUTION
Ensure that all I/O to the ATTO FastStream
has stopped. During this procedure, do not
interrupt the flash process.
1 The ATTO FastStream firmware is distributed
as an image file (
.ima). Download the
appropriate firmware file from the ATTO
website or insert the Installation CD containing
the file into your computer.
2 If you are not already in the ExpressNAV
Storage Manager, type the IP address of your
appliance in a standard browser. On the splash
screen, click
Enter Here. In the box provided,
type in your user name and password, and click
OK.
3 The Health and Status Monitor page appears.
4 Click on the Diagnostics button on the left
hand side of the ExpressNAV Storage
Manager.
5 The Diagnostics Menu page appears. From
the Select User Process box, select Update
the Firmware.
6 Click Next.
7 If you know the name and location of the .ima
file, enter it into the text box provided. If you do
not know the file name and location, click on
Browse to navigate to the new firmware and
click on it until the filename appears in the text
box.
8 Click Upload.
CAUTION CAUTION
Do not power down the host or the ATTO
FastStream. Interrupting the flash process
makes your FastStream inoperable and
you must return it to ATTO for repair.
9 Wait for a success message to be displayed.
10 Click on Restart.
11 When the Diagnostics Menu page appears
your new firmware has been uploaded and
installed.