Rapid-Air SERVO FEED WITH CUT-TO-LENGTH: 100, 200 & 300 SERIES - Manual (Page 29)

28
PRECAUTIONS & SAFETY
NEVER - Put screwdrivers or foreign materials in feed rolls
NEVER - Hold onto material as it is being fed through the servo
NEVER - Wear neckties around the servo feed rolls
NEVER - Force the rolls open by prying on them
NEVER - Modify the mechanical aspects of the servo feed
CAUTION - Contact the factory before drilling any holes in the unit
CAUTION - Wear proper eye protection when working around the servo
CAUTION - Do not wear loose clothing around the servo feed rolls