Rapid-Air SERVO FEED WITH CUT-TO-LENGTH: 100, 200 & 300 SERIES - Manual (Page 4)

3
TABLE OF CONTENTS
CHARTS AND DRAWINGS DIRECTORY pg. 4
INTRODUCTION pg. 5
INSTALLATION pg. 6
ELECTRICAL CABLES AND AIR LINE pg. 7
INTERFACING SERVO FEED WITH CUTTER pg. 8
PRETEST WRITE UP pg. 9
LOADING MATERIAL pg. 10
SERVO INTERFACING EXPLANATION pg. 11
PROGRAMMING PROCEDURE pg. 15
DRIVE ROLL PARALLELISM ADJ. pg. 21
TROUBLESHOOTING pg. 22
OPERATIONAL MAINTENANCE PROCEDURES pg. 24
PRECAUTIONS AND SAFETY pg. 28
WARRANTY pg. 29