Rapid-Air PALLET MASTER (PMD): PMD35 & PMD50. 115VAC, 1PH, 60HZ - Manual (Page 10)

Rapid Air Corporation
set up. Speed is adjusted on the 69100053 terminal board on the electrical control
sub-panel.
7. DANCER ARM LOOP HEIGHT & RANGE ADJUSTMENT -
a. Loop Range - The loop range thumbwheel adjusts the amount of travel the
dancer arm will move to provide the full range of speed of the pallet reel.
b. Loop Height - This thumbwheel is used for setting the start position of the
control arm. The setting determines when the reel will start turning. Each
position will move the operating angle of the arm so that top-to-bottom travel is
adjusted to accommodate specific material and loop height requirements.
ELECTRICAL COMPONENT DESCRIPTION
69100034 board—proportional control board
69100035 board—rotational isolation board
69100053 board—terminal board
PC control board (Ramm) - D.C. motor board
file:///C|/Web_develop/Pallet%20Master.htm (13 of 46) [12/10/2001 3:38:22 PM]