Rapid-Air PALLET MASTER (PMD): PMD35 & PMD50. 115VAC, 1PH, 60HZ - Manual (Page 2)

Rapid Air Corporation
OPERATING INSTRUCTIONS
PMD 35 &50
INSTALLATION
The machine that you have just received was disassembled for shipping
purposes. Please check all parts for shipping damage. If damage has occurred,
contact the carrier first and then Rapid Air to report the damage.
Upon opening the shipping crate, you will find the main base table control arm,
drum, and a counter weight. Release all the components from the hold down
position and put them in the location that the pallet reel will be assembled.
Locate the electrical wires to determine where the control arm will be mounted.
Attach the control arm to the table base with the (4) 1/2-13x3/4 hex head screws
provided.
file:///C|/Web_develop/Pallet%20Master.htm (3 of 46) [12/10/2001 3:38:22 PM]