Progressive International Electronics PIcon II Console - Manual (Page 29)

PIcon II Reports
Rev 1.0 January 2014 24
Print Reports
The purpose of Print Reports is to generate and print totals reports if a printer is attached to the
PIcon II, as well as to program the print header. If no printer is attached, “Paper Out” will
appear on the PIcon II display. This function is available to both manager and operator, but is
accessed differently, as described below.
Operator Mode OPR 2/Manager Mode M 3 — Print Reports
Operator Mode OPR 2 is accessed from the OPR 0 mode number prompt, by entering <2>
on the keypad. Then press <ENTER>.
Manager Mode MGR 3 is accessed from MGR 0 mode number prompt, by entering <3> on
the keypad. Then press <ENTER>.
Whether accessed through Operator Mode OPR 2 or Manager Mode MGR 3, the display then
will show PRN 0, prompting for entry of a report code number. From the following reports,
select the one to be printed.
PRN 1 — Resettable Totals
PRN 2 — Non-Resettable Totals
PRN 3 — Shift 1 Totals By Product (for previous shift)
PRN 4 — Shift 2 Totals By Product (for 2 shifts previous)
PRN 5 — Shift 3 Totals By Product (for 3 shifts previous)
PRN 6 — Grand Resettable Totals
PRN 7 — Grand Non-Resettable Totals
PRN 8 — Polled Totals
PRN 9 — Shift 1 Totals By Pump (for previous shift)
PRN 10 — Shift 2 Totals By Pump (for 2 shifts previous)