Progressive International Electronics PIcon II Console - Manual (Page 35)

PIcon II Programming
Rev 1.0 January 2014 30
Product Name — the display now prompts for information about Product #1. To assign a
product name, such as Unleaded, Regular or Plus to this product, press the <GRADE> key
until the product name is presented in the display. The product name already assigned may
be viewed by pressing the <SELECT> key, at which time the product name will be
displayed. Pressing the <AUTHORIZE> key will assign None for no product name.
To proceed to the next product number to be programmed, press the <ENTER> key. Follow
the same procedure for each product type at the site.
To exit PGM 3, press the <MANAGER> key. PGM 0, the mode entry prompt, will appear on
the display. To return to operator mode, press the <MANAGER> key again.
Program Mode PGM 4 — Set Dollar/Volume Default (PIcon II default — DOL/VOL)
In this mode, the default to be displayed on the PIcon II, Dollar or Volume, is selected. To
enter this mode from the PGM 0 mode number prompt, press <4> on the numeric keypad and
then press <ENTER>. Use the <A/B> key to toggle between DOL and VOL for dollar
amount or volume to be displayed.
To exit PGM 4, press the <MANAGER> key. PGM 0, the mode entry prompt, will appear on
the display. To return to operator mode, press the <MANAGER> key again.