Maple Systems MAPware-100 - Manual (Page 26)

The Action box is used to dictate the operation of each key. To select a key, use the mouse to click
on a function key in the Status box. The selected function key will darken and its attributes will be
displayed in the Attributes box on the lower half of the screen. Using the mouse, click on the down
arrow in the Action box to display a list of available function key operations. Select one with the
mouse to alter this function key’s operation. As a shortcut, the key can also be configured by
clicking on the appropriate colored square in the Legend/Action box or double clicking over the F
Key or by using the right mouse button. If a function key is configured to display a message when it
is pressed, the Message box will darken, indicating that it is now valid and will accept data entry.
Set the message number to display using the Message box. The View button will allow you to
browse through the messages to ensure that the proper message has been selected.
Communication Options
The Communication Options button is the shortcut for the Transfer/Communication Options
menu item. The communication parameters between the MAPware 100 software and the
OIT are configured using the following screen:
MAPware 100 User's Guide 25
1010-0089, REV00