Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 174)

Chapter 8 Installation and Wiring
8-3
„Installation Requirements
• For easier maintenance, operation, and improved ventilation, be sure to install the GP at least 100 mm
[3.94 in.] away from adjacent structures and otherequipment.
• Be sure that the surrounding air temperature and the ambient humidity are within their designated ranges.
(Surrounding air temperature: 0 to 50°C, Ambient humidity: 10 to 90%RH, Wet bulb temperature: 39°C
max.) When installing the GP on the panel of a cabinet or enclosure, "Surrounding air temperature" indi-
cates both the panel face and cabinet or enclosure’s internal temperature.
• Be sure that heat from surrounding equipment does not cause the GP to exceed its standard operating tem-
perature.
100[3.94]
Unit: mm[in.]
100[3.94] 100[3.94]
100[3.94]
100[3.94]
100
[3.94]
100
[3.94]
Panel
Face
Cabinet
interior