Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 198)

Chapter 8 Installation and Wiring
8-27
8.4.4 GP-3400/3500/3600/3700 Series
„Attachment
(1) Before starting the procedure, orient the two tabs on both sides of the USB Holder in the direction of the
arrows in the figure and remove the USB Cover.
(2) Attach the USB Holder to the USB Host Interface part of the main unit. Hook the upper pick of the USB
holder to the attachment hole of the main unit and then insert the lower pick as shown below to fix the
USB holder.
(3) Insert the USB cable into the USB Host Interface.
Tabs
GP-3400/3500/3600 series GP-3700 series
GP-3400/3500/3600 series GP-3700 series
USB cable