Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 24
Chapter 1 System Design
1-3
•
When connecting the CA3-ISO232-01, the 9 Pin’s setting of COM port is required to be VCC.
COM port settings can be set with the GP-Pro EX or in GP’s offline mode.
(8)
(8)
(8)
(8)
(12)
(5)
RS-232C Cable
CA3-CBL232/5M-01
Mitsubishi PLC Q-Series Link Cable
CA3-CBLLNKMQ-01
Omron PLC SYSMAC Link Cable
CA3-CBLSYS-01
Mitsubishi PLC Q-Series Connection Cable
CA3-CBLQ-01
RS-232C
Isolation Unit
CA3-ISO232-01
Switch setting
:RS-232C
Host Controller
PLC etc.
(9)
(9)
(11)
(9)
(5)
COM Port
Conversion Adapter
CA3-ADPCOM-01
RS-232C
Isolation Unit
CA3-ISO232-01
*2,3
Switch setting
:RS-422
RS-422 Cable
(Prepared by user)
Terminal Block
Conversion Adapter
CA3-ADPTRM-01
Mitsubishi PLC A, QnA,
FX Series' 2 Port Adapter II
GP070-MD11
2 Port
Adapter Cable
CA3-MDCB11
RS-422 Cable
CA3-CBL422-01
RS-422 Cable
CA3-CBL422/5M-01
Siemens TTY Converter Cable
CA6-CBLTTY/5M-01
(5)
(8)
(8)
(8)
(8)
(12)
Host Controller
PLC etc.
RS-232C Cable
CA3-CBL232/5M-01
Mitsubishi PLC Q-Series Link Cable
CA3-CBLLNKMQ-01
Omron PLC SYSMAC Link Cable
CA3-CBLSYS-01
Mitsubishi PLC Q-Series Connection Cable
CA3-CBLQ-01
Siemens TTY Converter Cable
CA6-CBLTTY/5M-01