Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 56)

Chapter 3 Part Names and Functions
3-11
G: Ethernet Interface (LAN)
The Ethernet transmission interface (10BASE-T/
100BASE-TX). An RJ-45 type modular jack
connector (8-pole) is used. The LED turns on or off
to indicate the current status.
H: USB Host Interface (USB) (X2)
Complies with USB 1.1. Uses a “ TYPE-A”
connector. Power supply voltage: 5VDC
±
5%,
Output current: 500mA(max). The maximum
communication distance : 5m.
I: Expansion Unit Interface 1
*1
Connects expansion units with communication
features.
J: VM Unit Interface
*1
(AGP-35*0T only)
The interface which connects the expansion unit
which is a kind of Display manufactured by Pro-
face.
K: Auxiliary input/output /Voice Output
Interface (AUX)
This interface is External Reset, Alarm Output,
Buzzer Output, and sound output.
L: Function Expansion Memory Interface Cover
Remove the cover. This is the interface for inserting
the function expansion memory that expands Pro-
face’s Screen Editor’s alarm and text table function.
LED Indicates
Green ON Data transmission available
Green OFF
No connection or subsequent
transmission failure
Yellow ON
Data transmission is
occurring.
Yellow OFF No data transmission
*1 The Expansion Unit Interface 1 and VM Unit Interface cannot be used simultaneously with AGP-35*0T.
I J
K
S R N O
L
Back
(AGP-3500L/3500S)
M
R N O S
T
Bottom
(AGP-3500L/3500S)