Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 125)

GP3000 Series Hardware Manual
4-60
4.5 GP-3600 Series
4.5.1 General Specifications
„Electrical Specifications
DC model AC model
AGP-3600T
AGP-3650T
AGP-3600U
AGP-3650U
AGP-3600T
AGP-3650T
AGP-3600U
AGP-3650U
Revision
*1
*1 The revision number of the GP is shown in the label affixed to the GP.
In the example shown below, an asterisk “*“ is displayed in the position where “5” should
be, meaning “Rev.5”.
When GP
Rev.5 is NOT
marked
When GP
Rev.5 is
marked
When GP
Rev.5 is NOT
marked
When GP
Rev.5 is
marked
Power Supply
Input Voltage DC24V AC100 to 240V
Rated Voltage DC19.2 to 28.8V AC85 to 265V
Rated
frequency
- 50/60Hz
Rated frequency
range
- 40 to 72Hz
Allowable
Voltage
10ms or less
Shorter than 1cycle
(Voltage drop interval must be 1s or
more.)
Power
Consumption
DC24V
2.08A or less
(TYP 1.30A)
DC24V
2.08A or less
(TYP 1.0A)
DC24V
2.08A or less
(TYP 1.50A)
AC100V
0.90A or less
(TYP 0.55A)
AC240V
0.45A or less
(TYP 0.30A)
AC100V
0.90A or less
(TYP 0.40A)
AC240V
0.45A or less
(TYP 0.23A)
AC100V
0.90A or less
(TYP 0.55A)
AC240V
0.45A or less
(TYP 0.30A)
In-Rush Current 30A or less 60A or less
Voltage Endurance
AC1000V 20mA 1minute
(between charging and FG terminals)
AC1500V 20mA 1minute
(between charging and FG terminals)
Insulation Resistance
10M
Ω or higher at DC500V(min.)
(between charging and FG terminals)
10M
Ω or higher at DC500V(min.)
(between charging and FG terminals)