Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 15)

15
LT-4201TM/4301TM Installation Guide
English
LT-4201TM/4301TM Installation Guide
Installation Installation
Inserting the Display Module with an Anti-Rotation Tee
Create a panel cut-out and insert the display module into the panel from the front. The figure
shows the panel cut-out:
Dimensions
NOTE: The display module supports a rotating torque of 6 N•m (53.10 lb-in).
Without the tee option, the display module supports a rotating torque of 2.5 N•m (22.12 lb-
in).
A B (1) B (2) C D
22.50 0/-0.30 mm
(0.88 0/-0.01 in.)
1.5...6 mm
(0.06...0.23 in.) 3...6 mm
(0.11...0.23 in.) 30 0/-0.20 mm
(1.18 0/-0.0007 in.)
4 0/-0.20 mm
(0.15 0/-0.007 in.)
(1) Steel sheet
(2) Glass fiber reinforced plastics (minimum GF30)