Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 43)

43
LT-4201TM/4301TM Installation Guide
English
LT-4201TM/4301TM Installation Guide
Communication Interfaces
Communication Interfaces Communication Interfaces
USB Device
When using a USB device, you can attach a USB holder to the USB interface on the side
of the unit to prevent the USB cable from being disconnected.
Attaching the USB Type A Holder
Hook the upper pick of the USB holder to the attachment hole and insert the lower pick to
fix the USB holder in place.
1 USB holder
2 USB cable
3 USB cover
Removing the USB Type A Holder
Push down the tab of the USB holder and then remove the USB cover.
1 USB holder
2 USB cover
3 USB cable