Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 16)

16
English
Installing the LT Display
The figure shows the assembly:
(1) Display module
(2) Panel
(3) Display installation nut
(4) Anti-rotation tee
Installing the LT Display Module with Spacer
The spacer supplied in the accessory kit PFXZGMAK1 (sold separately), allows mounting
the product on a:
 steel sheet support with a thickness between 1 and 1.5 mm (0.039 in. and 0.059 in.)
 plastic support with a thickness between 1 and 3 mm (0.039 in. and 0.118 in.)
 glass fiber reinforced plastic with a thickness between 2 and 3 mm (0.078 in. and
0.118 in.)