Proface APL3000B - Node Box PC - Manual (Page 42)

Chapter 2 Specifications
2-19
2.2 PS3001-BD
2.2.1 General Specifications
„ Electrical Specifications
„ Environmental Specifications
Power
Supply
Input Voltage DC24V
Rated Voltage DC19.2 to 28.8V
Allowable Voltage
Drop
5ms (max.)
Power Consumption 40W or less
Rush current 30A (max.) (Ambient Temperature)
Voltage Endurance
AC500V 20mA for 1minute
(between charging and FG terminals)
Insulation Resistance
DC500V 10M
Ω(min.)
(between charging and FG terminals)
Phy
s
ic
al
Surrounding Air
Temperature
0 to 50°C
Storage Temperature
−20 to +60°C
Ambient Humidity
10 to 90%RH (Not condensing, wet bulb temperature: 39°C or
less.
Storage Humidity
10 to 90%RH (Not condensing, wet bulb temperature: 39°C or
less.)
Dust Free of dust
Pollution Degree For use in Pollution Degree 2 environment
Corrosive gas Free of corrosive gases
Atmosphere
(Using height)
800 to 1114hPa (-300 to 2,000 meters above sea-level and below)
Me
chani
cal
Vibration Resistance
IEC61131-2 compliant
5 to 9Hz single-amplitude 3.5mm
9 to 150Hz constant-accelerated velocity 9.8m/s
2
X, Y, Z directions for 10 cycle (100 minute)
Electrical
Noise Immunity
Noise Voltage: 1500V
P-P
Pulse Duration: 50ns, 500ns, 1µs
Rise Time: 1ns
(via noise simulator)
Electrostatic Discharge
Immunity
6kV (complies with EN 61000-4-2 Level 3)
Noise Immunity
(Fast Transient Burst Noise) Power supply line: 2kV (IEC61000-4-4)
COM port: 1kV (IEC61000-4-4)
• When using any of the PS-B’s optional devices, be sure to check that device’s
specifications for any special conditions or cautions that may apply to its use.