Proface APL3000B - Node Box PC - Manual (Page 64)

Chapter 3 Installation and Wiring
3-9
(4) Remove the blank panel’s screw, and detach the blank panel.
(5) Insert the expansion board (commercial-type PCI) into the expansion board connector, and secure it in
place using the filler panel’s screw. The necessary torque is 0.5N • m to 0.6N • m.
(6) Place back both of the expansion board cover and expansion board support. The torque required to
tighten each of the screws is 0.5 to 0.6N
•m.
Expansion Board
(Commercial type)
Expansion Board Connector
Blank Panel
Screw