1 software configuration, 2 setting up an hdd with no pre-installed os, 1 setting up the os – Proface APL3000B - Node Box PC User Manual
Page 9: 2 setting up the ps-a dedicated software, 1 software configuration -2, 2 setting up an hdd with no pre-installed os -2, 1 setting up the os -2, 2 setting up the ps-a dedicated software -2, Software configuration, Setting up an hdd with no pre-installed os
PS-3710A / PS-3711A Reference Manual
1-2
1.1
Software Configuration
If you purchased the PS-A unit with pre-installed OS, all the software has been installed already.
If you purchased the PS-A unit with no pre-installed OS, you can download the software from the Pro-face
support site “Otasuke Pro!”.
1.2
Setting Up an HDD with no Pre-installed OS
First, when you use a PS-A with no pre-installed OS, you will need to install either Windows
®
2000 or Win-
dows
®
XP. You also need to install any required utility software.
1.2.1
Setting Up the OS
Install your operating system. For the setup procedures about the OS, refer to that product’s installation man-
ual.
1.2.2
Setting Up the PS-A Dedicated Software
Download the necessary drivers and utility software from the Pro-face support site “Otasuke Pro!”.
SEE
1.2.2 Setting Up the PS-A Dedicated Software (page1-2)
•
Specify [Disabled] for the USB-Device29 and the Function7 of the BIOS when you
install commercial Windows
®
2000, using a USB CD/DVD-ROM drive.
For USB-Device29 and Function7, refer to the following section.
• The PS-A unit supports Windows
®
2000 Service Pack 4 and Windows
®
XP Service
Pack 2. The PS-A unit performance cannot be guaranteed when any other
operating system is used.
•
The setup requires a USB or PS/2 keyboard.
•
For details about the drivers and utility software, refer to the following section.
SEE
Integrated Device Control Sub-Menu (page2-23)
SEE