Watlow Series 94 - Manual (Page 34)

A . 1 0 ■ A p p e n d i x W a t l o w S e r i e s 9 4
Appendix
Ordering Information
(2292)
94 _ _ - 1 _ _ _ - _ _ _ _
Part Number
Microprocessor-based
1/16 DIN, Single Input, Dual Output,
Four Digit Displays
IP65/NEMA 4X 1 Option
A = Without IP65 / NEMA 4X Rating
B = With IP65 / NEMA 4X Rating
CE Option
A = Without CE
B = With CE
Output 1 (Limit)
D = Electromechanical relay, Form C, 5A,
without contact suppression 2, 3
Output 2 (Alarm)
A = None
C = Switched dc output, non-isolated
D = Electromechanical relay, Form C, 5A,
without contact suppression 2, 3
K = Solid-state relay, Form A, 0.5A,
without contact suppression 3
Line Voltage/Power
0 = 100 to 240V~ nominal (high voltage)
1 = 12 to 24Vı (ac/dc) (low voltage)
Custom Options
00 = Standard
XX = Preset parameters
Display
Upper/Lower Upper/Lower
RR = Red/Red AA = Red/Red (without Watlow logo)
RG = Red/Green AB = Red/Green (without Watlow logo)
GR = Green/Red AC = Green/Red (without Watlow logo)
GG = Green/Green AD = Green/Green (without Watlow logo)
1 To effect IP65 (NEMA 4X) rating requires a minimum mounting panel thickness of 1.5 mm (0.06 inch)
and surface finish not rougher than 812 µ mm (0.32 µ inch). Use Greenlee punch 60287.
2 Electromechanical relays warranted for 100,000 closures only. Solid-state switching devices recom-
mended for applications requiring fast cycle times or extended service life.
3 Switching inductive loads (relay coils, etc.) requires using an RC suppressor. Quencharc from ITW
PAKTRON is recommended, Watlow part number 0804-0147-0000.
Series 94 Model Number Information
NOTE: User documentation may be available in French, German, Spanish, Italian and Dutch,
as well as English. Check Watlow’s website (www.watlow.com/) for availability. Specify
language at time of order.