From “segment viewer, Axf is reading in “online” mode in fieldmate) -2 – Yokogawa FieldMate User Manual
Page 18
Advertising
<4 START-UP FROM FieldMate>
4-2
IM 01R01A11-01EN
4.1
From “Segment Viewer” (AXF is reading in
“online” mode in FieldMate)
NOTE
Set the device address to 0. Verification Tool can be started only when the device address is set
to 0. For details on how to set the device address, refer to 9.2.
From “Segment Viewer”, “Verification Tool” can be started by either method (A) or (B).
(A) By right-clicking
Right-click on the target (AXF) icon displayed at “Segment Viewer”, and select “Verification Tool”.
F040102.ai
Figure 4.1.2 Start-up from “Segment Viewer” by Right-clicking
Advertising