Yokogawa DAQWORX - Manual (Page 177)

6-50 IM WX104-01E
Ethernet
TCP/IP
Set the IP address to a fixed IP address or obtain it automatically (DHCP).
Consult with your network administrator for the network parameters such as the IP
address, subnet mask, default gateway, and DNS.
When usng a fxed IP address
• DHCP
Set [DHCP] to [OFF].
• IP Address
Set the IP address to assign to the DX1000/DX2000.
• Subnet Mask
Set the subnet mask according to the system or network to which the DX1000/
DX2000 belongs.
• Default Gateway
Set the IP address of the gateway.
• Host Name
Set the DX’s host name using up to 64 alphanumeric characters. You do not have to
set this parameter.
• Doman Name
Set the network domain name that the DX1000/DX2000 belongs to using up to 64
characters. You do not have to set this parameter.
• Server Prmary, Server Secondary
Register up to two IP addresses for the primary and secondary DNS servers.
• Doman Prmary, Doman Secondary
Set up to two domain suffixes: primary and secondary.
6.5 Enterng Basc Settngs