Yokogawa Data Logging Software GA10 - Manual (Page 49)

3-25
IM 04L65B01-01EN
The available email transmission conditions are listed below.
• Send an email when an alarm occurs.
• Send an email when the communication status between the server and a data
collection device changes or when a data dropout occurs on the server.
• Send an email at specified intervals (such as everyday, every week, and every
month) or at a specific time within the interval.
• Send an email at specified intervals after data collection starts.
• Send an email when the creation of a data file is completed.
When you enter the conditions for sending emails, set the content of the email in the
following dialog box.
The content can be copied to another project.
Mail transmission
settings
• Sent from
• Sent to
• CC
• Title
• Content
Copy and Paste buttons
Can be copied to another project
Chapter 3 Configuring and Starting Data Collection and Recording