PreSonus StudioLive 16.0.2 - Manual (Page 25)

21
StudioLive™ 16.0.2 Owner’s Manual
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Tr
oubleshooting and W
arr
an
ty
Con
tr
ols
4.1.6 Copying Fat Channel Settings
In addition to being able to create and save custom Fat Channel
presets, every setting in the Fat Channel can be copied from
one channel or bus to any other channel or bus.
1. Press the Copy button to copy the settings on the selected channel or bus.
Every Select button on the StudioLive except the button for the currently
selected channel will begin to flash. The Select button for the selected
channel will not illuminate. You can copy a Fat Channel setting from any
channel or bus to any combination of channels and buses.
2. The Load button will also start to flash.
3. To paste the current channel’s Fat Channel setting to another channel or
bus, simply press that channel’s Select button. It will stop flashing and will
illuminate.
4. After you have selected every channel to which you want the settings
pasted, press the Load button. The StudioLive will return to its normal state,
indicating that the Fat Channel settings have been successfully pasted.
4.1.7 Loading Fat Channel Presets
The StudioLive comes with a suite of channel-strip presets created
by professional users of PreSonus products. These presets provide
a great jumping-off point to create a mix quickly and easily. The
StudioLive also allows you to create your own library of presets.
1. To load a preset to any channel on the StudioLive, first press the Select
button for the desired channel.
2. From the Fat Channel, press the Load button. You will notice that the LCD
now displays the Channel Preset Load menu.
3. The Channel Preset Load menu always displays the selected
channel onto which the preset will be loaded. Use the Value
encoder to locate the preset you would like to use.
4. Once you have made your selection, press the Recall button. If at any time
you would like to cancel this operation, simply press the Load button again.
Power User Tip: Load will stay active until you press the button again to disable
it, even if you select another channel. Because of this, you can quickly add a preset
to every channel and give yourself a jumping-off point to dial in your mix.