PreSonus StudioLive 16.0.2 - Manual (Page 31)

27
StudioLive™ 16.0.2 Owner’s Manual
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Tr
oubleshooting and W
arr
an
ty
Con
tr
ols
4.4.2 Internal FX Bus Controls
Internal Effects Bus Select Button. Enables Fat Channel Viewing.
As described in section 4.1.1, the Select button routes its effects bus through
the Fat Channel, allowing you to add dynamics processing and EQ.
Main Assign Button. Assigns/Unassigns FX bus to Main Output.
This button will route its internal effects (EFX) bus to the Main output.
It will illuminate yellow when the bus is patched to the Mains. To
mute the effect bus in the Main output, simply unassign it.
Aux Assign Button. Assigns/Unassigns FX bus to Aux 1-4.
This button will route its internal effects (EFX) bus to all four Aux
outputs. It will illuminate yellow when the bus is patched to the aux
buses. To mute the effect bus in the auxes, simply unassign it.
FX Level Control. Adjusts the Master Level of the Effects Send Mix.
This knob controls the overall output level of the internal effects mix.
4.4.3 Aux and FX Bus Channel Sends
In addition to setting the dynamics for each channel and bus, and
metering each channel and output, the Fat Channel allows you to create
aux mixes and quickly view the send level for each channel.
The Encoder Mode buttons to the left of the Fat Channel are used for this purpose.
Each of these buttons allows you to view and set the send level for each channel to
that aux or FX mix.
FXA Encoder Mode Button. Enables FXA Mixing in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become
the FX-send level controls for each of their respective input channels to FXA.
The meters will display the send amount of each of the input channels. The
encoders for the stereo channels set the send level for both the Left and the
Right input, provided that stereo linking is enabled. See 4.1.4 for details.
FXB Encoder Mode Button. Enables FXB Mixing in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the
effects-send level controls for each of their respective input channels to FXB.
The meters will display the send amount of each of the input channels. The
encoders for the stereo channels set the send level for both the Left and the
Right input, provided that stereo linking is enabled. See 4.1.4 for details.
Aux 1 Encoder Mode Button. Enables Aux Mixing in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become the
aux-send level controls for each of their respective input channels to Aux 1.
The meters will display the send amount of each of the input channels. The
encoders for the stereo channels set the send level for both the Left and the
Right input, provided that stereo linking is enabled. See 4.1.4 for details.
Aux 2 Encoder Mode Button. Enables Aux Mixing in the Fat Channel.
When this button is enabled, the 12 encoders in the Fat Channel become
the aux-send level controls for each of their respective input channels
to Aux 2. The meters will display the send amount of each of the input
channels. The encoders for the stereo channels set the send level for both
the Left and the Right input, provided that stereo linking is enabled.
When Aux 1 and Aux 2 are linked, this button enables pan control for each
channel in the Aux pair, and the 12 encoders in the Fat Channel become