PreSonus StudioLive 16.0.2 - Manual (Page 36)

32
4.6 Main Output Bus
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Troubleshooting
and W
arr
an
ty
Con
tr
ols
4.6 Main Output Bus
Main Select Button. Enables Fat Channel Viewing.
As previously described in Section 4.1.1, the Select button routes its channel through
the Fat Channel, enabling you to add dynamics processing, EQ, panning, etc.
Main Fader. Controls the Level of the Main Output.
The fader controls the overall level of the main stereo output.
The white area above the fader can be used as a scribble strip. Use only
oil pencils. Other types of pens or pencils cannot be wiped off.
To clean the scribble strip, use a lightly damp cloth to remove the writing. Spit works
pretty well, too.
4.7 Talkback System
The StudioLive features a Talkback microphone input on the back panel.
This can be routed to the aux outputs. It is important to note that the aux
outputs are grouped in this section. For example, if you are using Aux 3 as
the monitor mix to the bass player’s floor wedge and Aux 4 as the mix to
the keyboard player’s in-ear monitors, the talkback signal will be sent to
both monitors—so don’t say anything you wouldn’t want both to hear!
Power User Tip: If your musicians are using in-ear monitoring on stage, they
can feel isolated from the audience and require an ambience microphone. You
can use the Talkback input for this purpose instead of using a channel.
Talkback Mic Level. Controls the Overall Level of the Talkback Mic.
This knob controls the overall volume of the Talkback mic input. The trim for the
Talkback mic is located on the back panel next to the input. See Section 3.1 for
details.
Output Select Buttons. Assigns the Talkback Mic to the Aux 1-2 or Aux 3-4.
These buttons assign the talkback mic to the specified outputs. These buttons are
toggled on/off and will illuminate to indicate that the Talkback output is active. The
talkback mic can be assigned to every aux output at the same time.
Talkback Button. Turns the Talkback Mic On/Off.
This latching button turns the talkback mic on and off. It will
illuminate to indicate that the talkback mic is active.