PreSonus StudioLive 16.0.2 - Manual (Page 42)

38
5.1 The Digital FX (Effects) Menu
Ov
er
view
Con
trols
Hook
up
Resour
ces
Getting S
tar
ted
Digital E
ffec
ts
Mast
er C
on
trol
Troubleshooting
and W
arr
an
ty
Digital E
ff
ec
ts
Mast
er C
on
tr
ol
5 Digital Effects | Master Control
From the Digital Effects | Master Control
section, you can select and change the
parameters of the two internal effects
processors, and you can store and recall every
setting on the StudioLive. Because almost all
StudioLive features are controlled from the
mixing surface (rather than using menus and
submenus), you will mainly use this section
to adjust the internal effects processors and
to save and recall presets and Scenes.
Power User Tip: With all menus, the StudioLive
remembers which page you were on when
you navigated away to another menu. To
quickly jump to page 1, simply press the
menu’s button twice (e.g., to return to page 1
of the FX Menu, press the FX button twice).
5.1 The Digital FX (Effects) Menu
The StudioLive features two internal effects processors. Each processor can
access the StudioLive’s selection of high-quality reverbs and delays. Each of
these effect buses can be routed to the aux buses or the main outputs.
To access the effects library and make adjustments to effect parameters, press the FX
button in the Master Control section.
The first page of the FX menu is the QuickView screen. It displays both
of the effects assigned to the internal effects buses and the main
parameter for each. Effect A is assigned to EFX A bus, and Effect B is
assigned to EFX B bus.
Use the Next and Prev buttons to navigate through the screen. To
change a parameter, use the Value encoder directly beneath the LCD
screen. The color will invert for each parameter when it is selected for
modification.
The Next button will scroll through this screen in the following order:
FX A library selection, FX A main parameter, FX B library selection, FX B main
parameter.
When choosing your effects preset, use the Value encoder to scroll through the
library.
When you have arrived at your selection, press the Recall button to load it.
Press the Page Down button to move to the next page of the FX menu. Pages 2 and
3 of the FX menu display the rest of the parameters for FX A and FX B, respectively.
These parameters will change depending on what type of effect you have chosen.
Again, use the Next and Prev buttons to navigate through the screen and use the
Value encoder to change the selected parameter.