Renkus-Heinz VAX15S - Manual (Page 15)

Page 15
Output Power:
Freq. Resp:
THD Distortion:
Hum & Noise:
Damping:
Input:
Sensitivity:
CMR:
Input Connectors
Controls:
Pwr. Connector:
Power Input:
Power
Digital Format:
LF: 500 W RMS @ 4 Ohms
HF: 100 W RMS @ 4 Ohms
+0.0, -.5 dB, 20 Hz to 20 kHz
< 0.02% typical
<100 dB (A weighted)
>100
10K Ohm balanced differential
1.0 V for RPO
74 dB
CobraNet; Dual RJ45 connectors;
accept Cat 5 copper cable.
Analog Looping XLR; female in, male
out, (pin 1 chassis, pin 2 +, pin 3 -)
Phoenix connectors
evel, Mute, 10 dB Input Pad
IEC Power connector
Switchable, 115 or 230 V AC, 50/60 Hz
5 A @ 120 V, 2.5 A @ 240 V
Idle current: 400 ma @120 V;
200 ma @ 240 V
Max inrush current: 1 A
16, 20 or 24 bit PCM
48 or 96 kHz sample rate
Selectable network latency
PF2-500 Digital Amplifier Technical Specifications
Point Source Array Modules