Renkus-Heinz VAX15S - Manual (Page 3)

Introduction to VARIA 2
Stand Alone Applications 4
Ground Stacked & Pole Mounted Systems 4
Vertical Line Arrays 6
Horizontal Arrays 8
EASE Focus and RHAON 9
High Frequency Control Settings 10
Rear Panel Connections 11
Tech. Specs VA /VAX101-7, -15 -22 Array Modules 12
Dimensional Information 14
Tech Specs VA / VAX15S Subwoofer 15
DSP Settings for VA /VAX101-7 & VA / VAX15S 16
DSP Settings for VA /VAX101-15 & VA / VAX15S 18
DSP Settings for VA /VAX101-22 & VA / VAX15S 20
Safety Warnings 22
The VARIA Hardware Concept
The array modules have heavy metal side channels and each module is provided with 2 heavy
joining bars (one for each side) and associated quick release pins so it can easily be stacked with
similar modules For example , -7 modules with other -7 modules.
Joining unlike modules, for example joining -7 modules with -15 modules requires special joining
bars, called "biscuits". See list below.
The VA /VAX15S subwoofer uses the same technique, only it has 2 metal channels on each side
of the cabinet, one towards the rear and one towards the front. The two in the front channels are
hinged to allow the subwoofer to be used with either -7, -15 or -22
array modules. The connecting bars in the rear channels are simple single piece bars. Their
purpose is to help lock two subwoofers firmly together when they are stacked.
Part Number Used to Join
ICB-VA101-715 VA/VAX101-7 to VA/VAX101-15
ICB-VA101-722 VA/VAX101-7 to VA/VAX101-22
ICB-VA/101-1522 VA/VAX101-15 to VA/VAX101-22
Page 3
Point Source Array Modules
Table of Contents