STI AP-1-G-I - Manual

Installation Guide
& User Manual
Alert
Point
Alertpoint Installation rev 1_2 Sep10
Contents Page
Installation Guide
Introduction 2
Box Contents & Key Components 3
Specifications 3
Alert Point Installation 4
Removal of the Front Cover 6
User Manual
Programmable Features 8
Other Features 9
Installing a 12-30V DC Power Supply 10
Installing External Sounders 11
Installing External Strobes / Beacons 12
Installing External Detectors 13
Networking the Alert Point 14
Networking Features 16
Troubleshooting 17
PCB Terminal Diagram 18
Using an Alert Point as a Manual Call Point (MCP) 18
DIL switch settings - Programmable Features 19
Introduction
The Alert Point is an aesthetically pleasing, robust and fully featured stand alone alarm system.
Powered with a 9V DC alkaline battery, the Alert Point includes an integral sounder and
resettable call point.
Manufactured from tough polycarbonate, the Alert Point is designed for use in industrial as well
as commercial or retail applications.
Quick and easy to install and providing protection within minutes, the Alert Point is an ideal
solution for establishments that have a requirement for a simple but effective alarm system.
They may include: industrial/temporary buildings, warehouses, portacabins, churches, car parks,
small offices and holiday parks etc. Where an EN54 fire system is decommissioned on a
construction site, the Alert Point is ideal as a temporary system for raising an alarm in the event
of an emergency.
Available in a variety of colours, the Alert Point can be used for a wide range of applications such
as fire, intruder, panic, evacuation, assist or general alarm. It also incorporates a tamper switch
to prevent unauthorised removal or misuse.
- 2 -