Brocade FCX Series Hardware Installation Guide - Manual (Page 24)

CAUTION
Power-down your device before you install or replace a module for safety purposes and to
avoid instability due to a delay in power cycling.
FIGURE 17 Two-port 10 Gbps SFP+ module
10 Gbps SFP+ module port status LEDs TABLE 6
LED Condition Status
Link or Act LED (Link or
Activity On or flashing green Port has a valid link at 10 Gbps.
Flashing indicates activity.
Off The port is down.
Product Overview
22 Brocade FCX Series Hardware Installation Guide
53-1003077-01