Brocade FCX Series Hardware Installation Guide User Manual
Page 45
Stacking ports on Brocade FCX Series devices
TABLE 16
Stacking ports
Data ports
Panel/slot
Ports
Default
stacking
Can be data
ports
Default data
Can be
stacking
ports
4-port 10
Gbps SFP+
module
Front/2
1-4
Yes: 1, 2
Yes
Yes: 3, 4
Yes
FIGURE 29 16/10 Gbps CX4 stacking module on the rear panel of FCX S/S-F devices
1.
16/10 Gbps CX4 stacking ports
FIGURE 30 Two-port 10 Gbps XFP module on the front panel of FCX S/S-F devices
FIGURE 31 Four-port 10 Gbps SFP+ module on the front panel of FCX E/I devices
To connect FCX E/I devices and FCX S/S-F devices in a stack, you connect a 10 Gbps module on one
device to a 10 Gbps module on anther device. You cannot connect the 4-port 10 Gbps SFP+ module
(FCX E/I) to the 16/10 Gbps CX4 stacking module (FCX S/S-F).
Installing the FCX Switch
Brocade FCX Series Hardware Installation Guide
43
53-1003077-01