Brocade 7800 Extension Switch Hardware Reference Manual - Manual (Page 16)

Port side of the Brocade 7800
FIGURE 1 Port Side View of the 7800 Extension Switch
1. System Power LED
2. System Status LED
3. Console Port (RJ45)
4. Ethernet Management Port
5. USB Port
6. Fibre Channel Ports (16)
7. GbE ports - copper RJ45(2)
8. GbE ports - optical or copper SFP (6)
9. Serial number pull-out tab
The Fibre Channel ports are numbered from left to right on the faceplate as shown in the following
figure:
FIGURE 2 Port numbering in the Brocade 7800 Extension Switch
1. Fibre Channel Ports 0 through 3
2. Fibre Channel Ports 4 through 15
3. GbE ports ge0-ge1 (fixed copper RJ-45 only)
4. GbE ports ge0 through ge5 - (SFP - optical or copper)
You can have two trunking groups on a fully licensed Brocade 7800. Groups 1 would consist of FC
ports 0-7 and group 2 would be ports 8-15.
Port side of the Brocade 7800
16 Brocade 7800 Extension Switch Hardware Reference Manual
53-1001350-05