Sfp+ transceiver removal and replacement, Time and items required, Removing an sfp+ transceiver – Brocade 6520 Hardware Reference Manual User Manual
Page 47
Brocade 6520 Hardware Reference Manual
35
53-1002705-02
SFP+ transceiver removal and replacement
4
SFP+ transceiver removal and replacement
Use the following procedure to remove and replace an 8 Gbps, 10 Gbps, or 16 Gbps SFP+
transceiver.
DANGER
All fiber-optic interfaces use Class 1 lasers.
DANGER
Laser radiation. Do not view directly with optical instruments. Class 1 laser products.
Time and items required
The replacement procedure for one transceiver takes less than five minutes.
You should have the following items available:
•
Replacement SFP+ transceiver
•
Optical transceiver extraction tool (for 8 or 10 Gbps transceiver only)
Most Brocade switches and backbones come with a transceiver extraction tool (
) and
holster. The extraction tool is designed to remove transceivers from modules where the space is
limited.
FIGURE 13
Optical transceiver extraction tool
Removing an SFP+ transceiver
For the following procedure refer to
Complete the following steps to remove an SFP+ transceiver.