Brocade 6520 Hardware Reference Manual - Manual (Page 54)

42 Brocade 6520 Hardware Reference Manual
53-1002705-02
Regulatory compliance
A
Regulatory compliance
This section describes the regulatory compliance requirements for the Brocade 6520. It contains
the following standards:
• “FCC warning (US only)” on page 42
• “KCC statement (Republic of Korea)” on page 42
• “VCCI statement (Japan)” on page 43
• “Power cords (Japan DENAN)” on page 43
• “China” on page 44
• “BSMI statement (Taiwan)” on page 45
• “CE statement” on page 45
• “Canadian requirements” on page 45
• “German statement” on page 45
• “Laser compliance” on page 45
• “RTC battery” on page 46
• “Electrical safety” on page 46
FCC warning (US only)
This equipment has been tested and complies with the limits for a Class A computing device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and
used in accordance with the instruction manual, might cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at the user’s own
expense.
KCC statement (Republic of Korea)
6 UART1_RXD Receive data
7 Not supported N/A
8 Not supported N/A
TABLE 14 Serial cable pinouts (Continued)
PIN Signal Description
A 鞾 韥韥 (꽺ꓩ끞 ꗞꭖ뭪겕韥韥): 넩 韥韥鱉 꽺ꓩ끞(A鞾)냱ꈑ 놹녅볁놶뼞麦ꈒ냹 뼑 韥韥넩꿙鱽 볅ꎙ녅
鿅鱉 ꩡ끞녅鱉 넩 뇅냹 늱넍뼍겑韥 ꗉꄱꐥ, 閵뇊뀭넍 덵꾢꾅꫑ ꩡ끞뼍鱉 阸냹 ꑞ놶냱ꈑ 뼞鱽鲙.